Navkom Bioreader Bedienungsanleitung Seite 54

EN
HYBRID CONTROL
Control with the buttons on the control unit or remote control, using the application
only to unlock doors and control LED lighting:
Perform a factory reset and add the reader to the X-manager application. Connect it to the application and
then start adding administrator fingerprints by pressing button 1 on the control unit or button A on the
remote control.
FIRST CONNECTION TO THE READER
Download the X-manager application to your smartphone or tablet from Google play or
the App Store.
IT IS MANDATORY TO PERFORM FACTORY RESET BEFORE FIRST CONNECTION.
WHEN X-MANAGER APP WILL CONNECT TO A READER FOR THE FIRST TIME (BEFORE
PAIRING), THE ORANGE LED WILL BLINK TEN TIMES. IF THERE ARE MORE READERS IN RANGE
(NONE OF THEM PAIRED), ORANGE LED WILL ALSO INDICATE TO WHICH OF THE DEVICES X-MANAGER
HAS BEEN CONNECTED. ONCE THE READER IS PAIRED, THERE WILL BE NO MORE INDICATION WHEN
THE CONNECTION IS ESTABLISHED.
CONNECTING TO THE READER (ANDROID)
Instructions for connecting the reader and X-manager application for Android can be found
CONNECTING TO THE READER (APPLE)
Instructions for connecting the reader and X-manager application for Apple can be found
More information on using the X-manager application can be found
USER ENROLLMENT PROCEDURE
Instructions for entering administrator fingerprints with the keypad on the control unit can be found
HERE.
Instructions for entering administrator fingerprints with the remote control can be found
102
HERE.
HERE.
HERE.
HERE.
READER MANAGEMENT
Complete instructions for operating the reader as an analog device can be found
UNLOCK THE DOOR WITH THE APP
The user or administrator can unlock/open the door with the APP.
LED LIGHT MANAGEMENT
HERE.
By clicking on the field "Touch to open" the door
will unlock.
LED settings: If there is an additional LED
lighting in the door, it can be connected to
the system and controlled by the X-manager
(only with door leaf control unit). It is possible
to adjust the brightness (1% to 100%) and the
schedule for turning the lighting on/off. If the
checkbox next to the 24h is checked, the LED
will be switched on continuously.
EN
103