Your Product At A Glance; Assembly; Using For The First Time - CMi C-B-RM-40 Originalbetriebsanleitung

GB
• Operating the machine at excess speed
can increase the risk of accident.
• When turning on the machine, make sure
that your fingers are not caught between
the moving cutting blades and fixed parts
of the machine.
Maintenance and storage
• Make sure that all nuts, bolts and screws
are firmly tightened. You will then know
that the product is in a safe working con-
dition.
• While petrol is in the tank, never store the
lawnmower in a building in which petrol
vapours may come into contact with
naked flames or sparks or can be easily
ignited.
• To avoid the risk of fire keep the motor,
exhaust, and petrol tank area away from
grass, leaves, and leaking grease (oil).
• Regularly check the grass catcher for
wear or loss of functionality.
• Let the motor cool before turning off the
machine.
• When maintaining the cutting blades,
please note that the cutting blades can be
moved even when the machine is
switched off.
• For safety reasons always replace worn
or damaged parts. Use only original spare
parts and accessories.
• Should the tank need draining, do so out-
doors using a petrol suction pump.

Your product at a glance

Note: The actual appearance of your
product may differ from the illustra-
tions.
► P. 3, item 1
1. Switch-on lever
2. Handlebar
3. Handlebar, bottom part
4. Safety flap
5. Motor
6. Lever for cutting height adjustment
7. Collection box
► P. 3, item 2
8. Motor oil filling screw
9. Pull-starter
10. Tank cover
11. Fuel pump
12. Air filter housing
13. Ignition cable with spark plug
42
Scope of supply
• Instructions for use
• Lawn mower
• Collection box
• Handlebar
• Handlebar, bottom part
• Bag containing small parts

Assembly

Mounting the handlebar
Note: All mounting steps must be
performed on both sides.
► P. 4, item 3
– Position the bottom part of the handle
bar (3) into the locators on the product
and tighten with screws (14).
– Position the handle bar (2) onto the bot-
tom part (3) of the handle bar and push
through the carriage bolts (15).
– Position the toggle nuts (16) and tighten.

Using for the first time

Filling with fuel
DANGER! Risk of injury! Petrol is
highly inflammable!
Before refuelling, switch off the motor
and let it cool down.
Closely observe all safety information
for handling fuel.
NOTICE! Risk of product damage!
The product is supplied without motor
oil.
Make sure it is filled with motor oil
before using for the first time.
Note: Use only appropriate fuel
(► Risks caused by vibrations –
p. 39).
► P. 4, item 4
– Open and remove the tank cover (10).
– Carefully top up the fuel (tank contents:
► Risks caused by vibrations – p. 39). Do
not spill!
– Re-tighten the tank cover (10) by hand.
Filling with motor oil
► P. 3, item 2
– Unscrew and remove the motor oil filling
plug (8).
– Carefully top up the motor oil (tank con-
tents: ► Risks caused by vibrations –
p. 39). Do not spill!