8.1
Sensor configuration and settings
Prosonic Flow I
Single-path version
Sensor distance
Path length → 1, 10
1)
Depends on the conditions at the measuring point (measuring pipe, etc.). The mounting position of the sensor
can be determined via FieldCare or Applicator. See also Result Sensor Type / Sensor Distance parameter in
Measuring point submenu
Prosonic Flow P, W
DN 15 to 65 (½ to 2½")
Strapping band
2 traverses
[mm (in)]
1)
Sensor distance
–
1)
Depends on the conditions at the measuring point (measuring pipe, medium, etc.). The dimension can be
determined via FieldCare or Applicator. See also Result sensor distance / measuring aid parameter in
Measuring point submenu
2)
Only up to DN 600 (24")
Endress+Hauser
DN 200 to 4000 (8 to 160")
[mm (in)]
1)
Strapping band
1 traverse
[mm (in)]
1)
Sensor distance
Wire length → 26
Two-path version
Path length → 1, 10
Arc length → 1, 10
DN 50 to 4000 (2 to 160")
2 traverses
[mm (in)]
1)
Sensor distance
Sensor distance
1) 2)
Measuring rail
[mm (in)]
1)
Sensor distance
Welded bolt
1 traverse
2 traverses
[mm (in)]
[mm (in)]
1)
Sensor distance
Wire length
Measuring rail
EA01368D
1)
1) 2)
9