Athena GET 2ND INJ. KIT Installationsanleitung Seite 8

3.
Install GET fuel rail
on the support bracket
using the two supplied
red spacers and screws.
4.
Plug GET fuel hose
to the fuel rail and fix it
with a hose clamp. Plug
the male
of the 2nd
harness into the 2nd
injector.
2ND INJECTOR KIT INSTALLATION
ATTENTION:
PAY ATTENTION TO CUTTING EDGES.
1.
Connect the end
of hose A to the OEM
injector.
EN
connector
injector
A
To OEM injector
8
GET fuel hose