Product Layout - Athena GET 2ND INJ. KIT Installationsanleitung

5. GET Second Injector kit works only with GET ECUs which are
"second injector ready" (with the specific "INJ 2" connector).
The GET 2nd Injector Kit can be supplied:
Included in GET Pro Factory Kit: GET ECU is plug&play and
it is ready to operate after the second injector is installed.
The ECU comes with two pre-installed maps:
- Map 1: activate only the OEM injector
- Map 2: activate the OEM injector and GET 2nd injector
As accessory to a compatible GET ECU installed previously:
in this case, before installing the 2nd Injector Kit it is
necessary to install the specifically developed power map
on the ECU. Download it for free from www.athena.eu on
the specific product page and install it using GET Maya
programming software (sold separately). Otherwise, ask
for assistance from your GET dealership.
B. PRODUCT LAYOUT
Screws
Fuel rail
2nd injector
O-ring
2nd Injector
Seal
Spacers
Bracket
nuts
2nd Injector
support bracket
Fuel rail
nuts
2nd Injector support
3
Second
injector
harness
3-way fitting
Hose clamps
GET
fuel hose
fixing bracket
Bracket screws
EN