Preparatory Steps - Athena GET 2ND INJ. KIT Installationsanleitung

The GET 2nd INJECTOR KIT has been developed to increase the
engine performance and support the stock injector. The kit works
only with GET ECUs that are "2nd Injector Ready".
MAIN GET 2nd INJECTOR KIT FEATURES:
• Power maximization
Installing a second injector allows a huge power increase. The
difference is real, especially on medium and high revs.
• Injection optimization
GET kit ensures a higher power output, an improved fuel flow and
a better throttle response as well.
• Engineered and tested in GET laboratories
The kit and the maps are developed for your specific machine. GET
technicians study the OEM engine and components and design
and define the second injector position. Strict quality tests are
then performed both on dyno and on track.
C. PREPARATORY STEPS
KEEP THE ENGINE TURNED OFF AND REMEMBER TO
WORK UNDER SAFETY CONDITIONS.
MANIFOLD
1. Remove seat, the fuel tank and all other components to pull
out the manifold. Check in your motorbike's workshop manual
where to find them.
2. Rout the manifold area
shown in the picture in order
to have a regular and even
surface. It is necessary to
rout the mold seams to let
the second injector support
bracket, which will be installed
later, adhere perfectly to the
manifold surface.
EN
4