Dismounting, Return And Disposal; Dismounting - WIKA CPG1500 Betriebsanleitung

9. Dismounting, return and disposal

9. Dismounting, return and disposal
Personnel: Skilled personnel
Protective equipment: Protective gloves, safety goggles
EN
Tools: Open-ended spanner SW 27 or torque spanner
WARNING!
Physical injuries and damage to property and the environment
through residual media
Residual media at the dismounted model CPG1500 precision digital pressure
gauge can result in a risk to personnel, the environment and equipment.
▶
▶
▶
9.1

Dismounting

WARNING!
Physical injuries and damage to property and the environment
through residual media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
▶
WARNING!
Physical injury
When dismounting, there is a danger from aggressive media and high
pressures.
▶
1. Switch of the CPG1500 precision digital pressure gauge
2. Unscrew the digital pressure gauge with a spanner or torque spanner till it is loose
using the spanner flats.
3. Screw out the digital pressure gauge by hand.
4. If required, clean the digital pressure gauge, see chapter 8.3 "Cleaning".
36
Observe the information in the material safety data sheet for the
corresponding medium.
Use the requisite protective equipment.
Wash or clean the dismounted instrument, in order to protect persons and
the environment from exposure to residual media.
Before storage of the dismounted instrument (following use) wash or
clean it, in order to protect persons and the environment from exposure to
residual media.
Disconnect test and calibration installations once the system has been
depressurised.
WIKA operating instructions, model CPG1500