10. Specifications
Basic instrument
Permissible ambient conditions
Operating temperature
Medium temperature
Storage temperature
Relative humidity
Communication (optional)
Interface
Case
Dimensions
Ingress protection
Weight
7) The user-defined units can only be set via the WIKA-Cal software. The CPG1500 must feature WIKA-Wireless.
8) To use the logger function, WIKA-Cal software is needed.
The logger data can be downloaded as CSV file using the demo version of WIKA-Cal. You can use the live logger for an accurate
data analysis or a direct generation of certificates by means of the logger template of the WIKA-Cal.
9) Only the following models are allowed in Ex area:
Duracell, Simply by Duracell MN1500
■
Duracell, Duralock Plus Power MN1500
■
Varta, RAYOVAC Maximum Plus 4006
■
10) Requires a PC with Bluetooth® 2.1 interface
10.3 WIKA-Wireless
10)
WIKA-Wireless
Frequency range
HF output power
Number of channels
Classic
Low Energy
Channel spacing
Classic
Low Energy
Bandwidth
Output power
10) Requires a PC with Bluetooth® 2.1 interface
WIKA operating instructions, model CPG1500
-10 ... +50 °C (14 ... 122 °F)
-10 ... +50 °C (14 ... 122 °F) (lower temperature limit above the freezing
point of the medium)
-20 ... +70 °C (-4 ... +158 °F)
< 95 % r. h. (non-condensing)
10)
WIKA-Wireless
approx. 100 x 150 x 59 mm (3.9 x 5.9 x 2.3 in)
IP65
Standard: incl. batteries approx. 680 g (1.5 lbs)
with protective rubber cap: approx. 820 g (1.81 lbs)
2,400 ... 2,500 MHz
max. 2 dBm (+ 2 dBi)
79
40
1 MHz
2 MHz
1 or 2 MHz
4 dBm / 10 mW
Maximum output power under fault conditions for Ex ia: 490 mW
EN
41