Battery Replacement - WIKA CPG1500 Betriebsanleitung

8. Maintenance, cleaning and recalibration
8.2

Battery replacement

DANGER!
Danger to life from explosion
EN
Through working in flammable atmospheres, there is a risk of explosion
which can cause death.
▶
▶
▶
▶
▶
▶
▶
▶
Procedure
1. Turn off the instrument and lay it face down.
2. Loosen the three screws of the battery compartment, see Fig. 1 "Position of the battery
compartment".
3. Remove the battery cover.
4. Insert the three AA-sized batteries in correct polarity. Only use permitted batteries, see
chapter 3.6.2 "Permitted batteries".
5. Put the battery cover on and screw it tight with the three screws.
⇒
Tighten the upper screw first.
Fig. 1 - Position of the battery compartment
If the instrument is not used for a long time, remove the batteries.
34
Only use the listed batteries, see chapter 3.6.2 "Permitted batteries"!
Do not use rechargeable batteries!
The instruments must not be opened in hazardous areas!
Only replace the batteries outside the hazardous area!
Always replace all three batteries together!
The battery cover must be closed and locked in place!
Secure the battery cover with the three screws!
Ensure the correct polarity.
WIKA operating instructions, model CPG1500