6. Commissioning, operation
2. Open the menu item "Object manager / Workplace".
3. Call the wireless function.
⇒
The wireless monitor opens.
4. Click in the address field.
EN
⇒
The address will be displayed automatically. If required, correct this.
⇒
The communication is working properly if the pressure value displayed on the
instrument is shown after pressing the [Test] button.
⇒
If the "WIKA-Wireless" function is not activated in CPG1500, an error message
shows up. Activate "WIKA-Wireless" in CPG1500, see chapter 6.5.1 "Activating
WIKA-Wireless in CPG1500".
5. Access the configuration of the instrument via [Config] in the dialog window.
The "General", "Units", "Sensor", "Display", "Error diagnosis" and "Logger"
functions are available in the configuration window.
General information
Here are all the general parameters of the CPG1500 used.
It features the write protection via a PIN code. Therefore the setting is protected against
unauthorized access.
28
WIKA operating instructions, model CPG1500