AsViva MG5 Betriebsanleitung Seite 42

ASSEMBLY
STEP 5
1. Thread all calbles (22-1, 22-2 and 22-3) trough the respective guides as shown in the illustration.
NOTE: Do not cintinue with step 2 until all cables are threaded.
2. Mount the pulleys (23) as shown in the illustration.
3. Please check if the cable is securely tightened after the machine is assembled. If the camble is
loose, adjust the lower bolt of the upper frame cover (48). If the cable ist very loose, adjust the
pulley bracket hole (30).
42