AsViva MG5 Betriebsanleitung Seite 41

ASSEMBLY
STEP 4
1. Connect the upper frame (13) to the guide rods (7) and secure them with bolts (54) and washers
(64). Then attach the upper frame (13) to the vertical frame (10) using bolts (56-1), washers (56-
12), nuts (56-14) and a connector (53-3).
2. Attach the front press base (14) to the upper frame (13) and secure it with an axle (53-9), two was-
hers (56-12) and nuts (56-3).
3. Attach the left butterfly (15) to the front press base (14). Secure them with washers (56-13) and
nuts (56-14). Repeat this process for the right butterfly (16).
41