AsViva MG5 Betriebsanleitung Seite 40

ASSEMBLY
STEP 3
1. Attach the vertical frame (1) to the main frame (2) and secure both parts with two washers (56-12)
and two nuts (56-14).
2. Attach the main seat support (11) to the main frame (2) and fix it with two washers (56-12) and two
nuts (56-14).
3. Now attach the main seat support (11) to the vertical frame (10). Secure it with the connector
(53-3), bolt (56-1), washer (56-12) and nut (56-14).
4. Connect the leg developer (12) and the main seat support (11) to each other. Secure them with an
axle (53-8), bolts (56-3) and washers (56-12). Now secure the pulley bracket (53-1) to the vertical
frame (10) with bolt (56-2), washer (56-12) and nut (56-14).
40