Serial Communication Descriptions - Agilent TPS-compact Betriebsanleitung

Technical Information
The communication port mating connector is supplied with the RS232 PCB
(AMP/Cannon or equivalent 15-pin "D" type male connector).
For example, the Transmit data signal from controller (pin 2) must be connected to
the host computer's receive data line (pin 2) and vice versa. Consult the host
computer's instruction manual for its serial port connections
Agilent cannot guarantee compliance with FCC regulations for radiated emissions
NOTE
unless all external wiring is shielded, with the shield being terminated to the metal
shround on the 0-subconnector. The cable should be secured to the connector
with screws.

Serial Communication Descriptions

This unit can communicate by two different protocol:
protocol (old system) "letter"

"Window" protocol (new system).

These two protocols can be used as well with 232 or 485 media.
NOTE
Please use "Window" protocol for new development.
216 Agilent TPS-compact User Manual