Main Functions - Dantherm HRV 501 Serviceanleitung

Main functions

Activating the re-
mote controller
Manuel fan speed
Temperature read
out
Menu navigation
16
Activate the remote controller by pressing any key (if deac-
tivated). The display will show its home screen
This example show it´s Wednesday, the
time is 13:45. All menu icon on indicat-
ing that the fan is set manually in step
one.
HOME - UP/DOWN will select fan speed manually in four in-
dividual steps.
Speed 4 (highest) is deactivated after 4 hours, and speed 3
is automatically selected.
Top bar only is flashing – speed 4
If only calendar icon is visible, the unit is run-
ning in auto fan speed week program mode
HOME -LEFT/RIGHT toggles through the unit´s four air
temperature sensors, placed inside the unit.
An arrow show selected air sensor
Temperature is shown in the clock position
In this case the outside air is -3°C, when entering
the unit
HOME - OK activates the settings menu. The first icon from left
"CLOCK" will start flashing.
LEFT/RIGHT toggles through the menu's, OK for selecting a menu
UP/DOWN to adjust a parameter inside a menu
One bar visible – speed 1
Two bars visible – speed 2
Three bars visible – speed 3
OK