Designated Use - Abicor Binzel K10 Betriebsanleitung

Gouging torch
1 Identification
1.1 Marking
2 Safety

2.1 Designated use

2.2 Classification of the warnings
All manuals and user guides at all-guides.com
The gouging torches K10, K12, K12T, K16, K16T and K20 are exclusively
designed for arc gouging using carbon electrodes and compressed air and for
industrial and commercial use by skilled personnel. The gouging torches are
available as manual torches and can be used in any welding position. The
gouging torches must only be operated using original ABICOR BINZEL
spare parts.
This product fulfills the requirements that apply to the market to which it has
been introduced. A corresponding marking has been affixed to the product, if
required.
The enclosed safety instructions must be observed.
• The device described in these instructions may be used only for the
purpose described in these instructions in the manner described. In doing
so, observe the operating, maintenance and servicing conditions.
• Any other use is considered contrary to the designated use.
• Unauthorized conversions or power increase modifications are not
allowed.
The warnings used in the operating instructions are divided into four different
levels and are shown prior to potentially dangerous work steps. Arranged in
descending order of importance, they have the following meaning:
DANGER
Describes an imminent threatening danger. If not avoided, this will result in
fatal or extremely critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in
serious injuries.
1 Identification
EN - 3