Designated Use - Abicor Binzel ALPHA FLUX Serie Betriebsanleitung

ALPHA FLUX
1 Identification
The ALPHA FLUX welding torches are designed exclusively for fluxed-core welding with self-
shielding wires (FCAW). They are designed for industrial and commercial use for skilled
personnel only and are available for manual welding. The welding torches can be used --in all
weldi0n,g positions.
The standard model is handle S with control device for a maximum of 42 V and 0.1 to 1A. These
operating instructions only describe ALPHA FLUX welding torches. The welding torch system
may only be operated with original ABICOR BINZEL spare parts.
The ALPHA FLUX welding torches conform to EN 60 974-7 and are not considered devices
having their own functions. Arc welding can only be carried out in connection with a welding
power supply.
1.1 Marking
This product fulfills the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product, if required.
2 Safety
The enclosed safety instructions must be observed.

2.1 Designated use

• The device described in these instructions may be used only for the purpose described in
these instructions in the manner described. In doing so, observe the operating, maintenance
and servicing conditions.
• Any other use is considered contrary to the designated use.
• Unauthorized conversions or power increase modifications are not allowed.
2.2 Classification of the warnings
The warnings used in the operating instructions are divided into four different levels and are
shown prior to potentially dangerous work steps. Arranged in descending order of
importance, they have the following meaning:
DANGER
Describes an imminent threatening danger. If not avoided, this will result in fatal or extremely
critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in serious injuries.
BAL.0153 • 2018-08-24
1 Identification
EN - 3