Functional Description - Abicor Binzel K10 Betriebsanleitung

5 Functional description

5 Functional description
1
10
9
1 Fastener
2 Connector with hinge
3 Hollow cable
4 Connection lug
Fig. 1 Overview of the gouging torch
5.1 Gouging
EN - 6
All manuals and user guides at all-guides.com
Order the equipment parts and wear parts separately. 
Order data and ID numbers for the equipment parts and wear parts can be
found in the current catalogue. Contact details for advice and orders can be
found online at www.binzel-abicor.com.
ABICOR BINZEL Schweißtechnik Dresden GmbH & Co. KG offers repair
services at the factory.
8
5 Compressed air nozzle
6 Distance adaptor (screwable)
7 Handle
8 Compressed air valve
The fastener (1) is used for clamping the carbon electrodes. The clamp levers
are protected by the insulating jaws (10). The handle (7) contains the valve
seat for opening and closing the compressed air.
On the connector side, compressed air nozzles (5) (3/8 NPSI thread) of
different nominal diameters can be used.
The hollow cable (3) is used for the power and compressed air lines and may
or may not be equipped with a hinge (2) on the handle side. The hollow
cable's copper cord is connected to the distance adaptor using a screw-type
connection.
The compressed air valve (8) can be used to connect and disconnect the
compressed air. The carbon electrodes are clamped between the clamp lever
and the nozzle. The air openings on the nozzle (9) point towards the arc.
Plasma-arc gouging is used to remove or cut metal parts. A welding current
conducted through carbon electrodes produces a plasma arc that liquefies the
metal by melting it. The melt is air-blasted using a jet of compressed air directed
by nozzles.
2
7
Gouging torch
3
4
6 5
9 Nozzle
10 Insulating jaws