Cleaning; Cleaning The Device; Storage - Steinbach Poolrunner Twin Originalbetriebsanleitung

Cleaning

Only clean the device with a standard bathroom cleaner, clear tap water and a lint-free cloth. Aggressive
cleaning agents can damage the device. Dry the product with a lint-free cloth.

Cleaning the device

1. Remove and clean the filter units.
2. Rinse the device and the floating cable after each use with plain tap water inside and out.
The device is clean.
Removing the filter units
1. Unscrew the fixing screw
2. Take the top part
2
3. Pull the filter units
7
device.
The filter units are removed.
Cleaning the filter units
1. Open the Velcro hook-and-loop strap of the filter
bags or and pull them off the filter units
6 11
2. Thoroughly rinse the filter units
bags or with plain tap water.
6 11
3. Pull the cleaned filter bags
units (note the position of the recess) and
7
close the hook-and-loop strap.
The filter units are cleaned.

Storage

1. Thoroughly clean the device (see section "Cleaning").
2. Let all parts dry completely.
32
.
1
off.
straight up and out of the
and the filter
7
or over the filter
6 11
10
1
2
11
7
12
.
7
/
6 11
7
7