Preparation; Installing The App; Operation; Cleaning The Pool - Steinbach APPcontrol Originalbetriebsanleitung

Current mode
7
Indicates the current mode.
Time until next cleaning
Indicates the time until the automatic start of the next cleaning. Is only displayed if the
autostart function is active.

Preparation

Installing the app

You have to install the app to use all functions of the device.
or look in the Apple App Store for "Steinbach
APPcontrol"

Operation

Check the following before each use:
- Is there visible damage on the device?
- Is there visible damage on the control elements?
- Do all individual parts function?
- Are the accessories in perfect condition?
- Are all cables in perfect condition?
Do not start up a damaged device or damaged accessories. Have them checked by the
manufacturer or its customer service or a qualified service technician.

Cleaning the pool

Observe the following before cleaning your pool:
- We recommend thoroughly cleaning the device before using it for the first time.
- Remove any cover or film from the pool.
- Remove obstacles (such as a ladder) from the pool.
- Switch off the filter system at least one hour before the start of cleaning so that
particles in the water can settle on the floor.
- Never let the device run outside of the water as this can cause damage even after a
short time.
44
8
iOS Android
or look in the Google Play Store for
"Steinbach APPcontrol"