Attaching The Cleaning Strips - Steinbach Poolrunner Battery Basic Originalbetriebsanleitung

B-C
(Setting for large pools)
B-A
(Setting for small pools)
1. Press the retaining lugs away from the half axle and pull off the wheel.
2. Insert in the wheel with the catch so that it snaps into place at the respective letter
for the selected setting.
The wheels are set.

Attaching the cleaning strips

Only attach the cleaning strips if they can assist cleaning (e.g. for removing a biofilm). In
the case of an inclination, unevenness, too much dirt on the floor or cold water
temperature, the cleaning strips might have an adverse effect on the cleaning result.
1. Insert the cleaning strips
suction channels on the bottom of the
bottom part
3
2. Make sure that the cleaning strips
have properly engaged and have a tight
fit.
The cleaning strips are attached.
36
into the
15
.
5
6
7
15
3
15