Steinbach Poolrunner Twin Originalbetriebsanleitung Seite 26

Use the AUTOSTART button
operation, the lit LED indicates the currently selected mode. If no cleaning interval is active, all LEDs
16
blink or none of the LEDs of the LED display blink
- 1D repeats cleaning daily.
- 3D repeats cleaning every 3 days.
- 7D repeats cleaning every 7 days.
Time function
13 15
Use this function to set the running time.
Use the TIME button to switch between the running times. After the start of operation, the LED
13
indicator indicates the currently selected and active mode by blinking.
15
- 1H stops cleaning after 1 hour.
- 1.5H stops cleaning after 1.5 hours.
- 2H stops cleaning after 2 hours.
ON/OFF function
14
Use this function to switch the device on and off.
Use the ON/OFF button
14
- ON switches the device on and starts cleaning at the same time.
- OFF stops cleaning and switches the device off at the same time.
26
to switch between the cleaning intervals. Before and after the start of
12
.
16
to switch between the following functions: