Setting Parameters - Balluff BTS M30E0-UUI-H0001-S04G Betriebsanleitung

BTS M30E0-_ _ _-H0001-S04G
Infrared Temperature Sensor
7

Setting Parameters

When setting parameters in the menu the sensor continues to use the existing parameters until a parameter change
is confirmed with [↵]. After 1 min without pressing a button the menu is automatically exited.
1. Change to menu
► Change to menu with [↵].
► Navigate to desired parameter with [▼],
[▲] and [↵].
2. Navigate to parameter setting level
► Change to setting level with [↵].
⇒ The current setting in effect is displa-
yed.
3. Change parameter
► Use [▼] or [▲] to change the parameter
value.
4. Apply parameter
► Confirm with [↵].
⇒ New setting becomes effective and is
saved.
Change more parameters?
► Repeat the procedure beginning with Step 2.
5. Exit parameter setting
► Use the escape function [▲▼] to exit the menu.
► Alternately wait 1 min
⇒ The menu is then automatically exited.
► Alternately use menu point Exit to exit the menu.
www.balluff.com
All manuals and user guides at all-guides.com
17
english