BTS M30E0-_ _ _-H0001-S04G
Infrared Temperature Sensor
5
Operating Element and Display (Local User Interface)
5.3
Button Disable
► Press and hold [▲▼] (approx. 2 s) to activate or deactivate key lock.
⇒ The lock indicates that key lock is active (graphic) or disappears if inactive.
Note
After activating key lock the display will turn off after 10 s.
5.4
Start Screen
After applying power the temperature sensor is ready to use and shows the start screen for 3 s. During this time all
outputs are turned off (high-impedence). The display then changes to the home screen with the current measurement
value as well as the selected settings.
1
2
5.5
Home Screen
By default the display shows the home screen. There the current temperature value and the most important settings
are displayed. Clicking on the [↵] key changes the menu.
1
2
www.balluff.com
All manuals and user guides at all-guides.com
1
1 The lock indicates that key lock is active (graphic).
2 Information how to deactivate the key lock by holding
down (2 s or more) [▲▼]
2
1 Order code
2 Firmware version
1 Effective upper switching thresholds
2 Visualization of the current temperature value in the detec-
tion range as a bar with both effective upper threshold
3
values
3 Current temperature value
1 Special evaluation procedure active
1
2
2 Key lock active
3 Temperature value:
3
LO = Temperature value less than the lower detection
HI = Temperature value greater than the upper detection
4
4 IO-Link communication
range limit
range limit
english
13