Cleaning The Cooling Unit And The Filling Chamber Screen; Cleaning The Cooling Unit And The Filling Chamber Screen With Isopropyl Alcohol - STORZ & BICKEL Mighty+ Gebrauchsanweisung

7.1.2.2 Cleaning the Cooling Unit and the Filling Chamber Screen with
Isopropyl Alcohol
CAUTION
Isopropyl alcohol is flammable and may easily ignite
Caution! Hot surface!
• Follow the safety instructions of the isopropyl alcohol
manufacturer!
NOTICE
Material damage caused by improper cleaning
Bleaching of the Cap Lock Sticker
Dissolving the adhesive of the Cap Lock Sticker
• Wipe off the Cap Lock with Signet hologram only with
isopropyl alcohol.
NOTICE
Material damage caused by improper cleaning
Embrittlement of plastic parts
• Soak plastic parts in isopropyl alcohol for maximum 1/2 hour.
7 C L E A N I N G / H Y G I E N E
X Place all parts of the Cooling Unit
(except the Cap Lock) and the Fill-
ing Chamber Screen in isopropyl
alcohol for a maximum of 1/2 hour.
X If necessary, wipe the Cap Lock
with isopropyl alcohol.
X Rinse all parts under running water
for at least one minute.
X Let all parts dry completely.
58