Disassembling The Filling Chamber Cap; Cleaning The Cooling Coil - STORZ & BICKEL Plenty Gebrauchsanweisung

10. D I S A S S E M B L I N G , C L E A N I N G A N D A S S E M B L I N G
10.3. Disassembling the Filling
Chamber Cap
Pull the Cooling Coil out of the Filling
Chamber Cap with a gentle twist, and
then remove the Tubing Section from
the Cooling Coil.
Pull the Cooling Coil out of the Filling
Chamber Cap
Push the upper Screen out of the Fill-
ing Chamber Cap from above, by using
(for example) the handle of the includ-
ed Cleaning Brush.
Cooling Coil
Lower Tubing
Section (short)
Filling
Chamber Cap
Push out the upper Screen with help of the
Upper Screen
Cleaning Brush
Reassemble in reverse order.
The upper Screen must be inserted
carefully into the groove provided. Dis-
regarding this may allow plant parti-
cles to enter the Cooling Coil, so block-
ing this or be inhaled.

10.3.1. Cleaning the Cooling Coil

Place the Cooling Coil in a glass and
immerse it completely in alcohol (etha-
nol), cover the glass, and let it soak
overnight.
Repeat this process until the inside of
the Cooling Coil is completely clean,
then rinse it carefully with water.
61
Warning! Alcohol is flamma-
ble and may easily ignite.
Sets of new Cooling Coils may
be ordered from www.storz-
bickel.com.