Factors Influencing Vaporization; Commissioning And Operation; Unpacking - STORZ & BICKEL Mighty+ Gebrauchsanweisung

5 FA C T O R S I N F L U E N C I N G VA P O R I Z AT I O N
X Follow the instructions below to ensure that the Vaporizer with the plant
material you use is optimally adjusted to your personal needs.
The amount of aromas and fragrances released can be influenced by the
following factors:
1. Quality: The amount of aroma or fragrance contained in the respective
plant material that can be vaporized.
2. Quantity: The amount of vaporization material in the Filling Chamber.
3. Surface: The finer the plant is ground, the greater the surface and the
more aromas and fragrances can be released during the vaporization
cycle.
4. Temperature: The higher the temperature, the more aromas and scents
are released at once. An increase in temperature should always be a last
resort, as the plant material has a more burnt taste at higher tempera-
tures.
X The vaporization process can be repeated with the same contents of the
filling chamber until vapors are no longer formed at maximum tempera-
ture.
X For reasons of taste, it is recommended to replace the vaporization ma-
terial beforehand.
6 C O M M I S S I O N I N G A N D O P E R AT I O N

6.1 Unpacking

X Check the Vaporizer for completeness using Chapter 1.1 "Scope of Delivery",
page 41.
X Check the Vaporizer and the USB-C Cable for externally visible damage.
48