Cleaning The Cooling Unit And The Filling Chamber Screen With Rinsing Water - STORZ & BICKEL Mighty+ Gebrauchsanweisung

7.1.2 C leaning the Cooling Unit and the Filling Chamber Screen
X Use Cleaning Brush and cotton swabs and paper or cotton cloths for
manual cleaning.
X Use warm rinsing water or isopropyl alcohol as a solvent.
X Clean the Filling Chamber Screen and the Screen of the Cooling Unit with
the Cleaning Brush after each vaporization.
7.1.2.1 C leaning the Cooling Unit and the Filling Chamber Screen with
rinsing Water
X Place all parts in warm rinsing water for at least five minutes.
X Rinse all parts under running water for at least one minute.
X If necessary, clean the Cap Lock with warm rinsing water.
X Let all parts dry completely.
7 C L E A N I N G / H Y G I E N E
X Unscrew the Cooling Unit base from
the Vaporizer by turning it 90° coun-
terclockwise.
X Lever out the large Base Seal Ring
with Filling Chamber Tool at the re-
cess in the groove.
X Remove the small Base Seal Ring.
X Press the Screen with the Filling
Chamber Tool from the top to the
bottom out of the Cooling Unit base.
57