Inhaltsverzeichnis
Werbung
Certificate: 70009819
Project: 80065116
MARKINGS
The manufacturer is required to apply the following markings:
x
Products shall be marked with the markings specified by the particular product standard.
x
Products certified for Canada shall have all Caution and Warning markings in both English and French.
Additional bilingual markings not covered by the product standard(s) may be required by the Authorities Having
Jurisdiction. It is the responsibility of the manufacturer to provide and apply these additional markings, where
applicable, in accordance with the requirements of those authorities.
The products listed are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and
US (indicating that products have been manufactured to the requirements of both Canadian and U.S. Standards) or
with adjacent indicator 'US' for US only or without either indicator for Canada only.
x Manufacturer's name: "Berthold Technologies GMBH & CO KG", or CSA Master Contract Number
"215040", adjacent to the CSA Mark in lieu of manufacturer's name.
x Model designation: As specified in the PRODUCTS section, above.
x Electrical ratings: As specified in the PRODUCTS section, above.
x Ambient temperature rating: As specified in the PRODUCTS section, above.
x Manufacturing date in MMYY format, or serial number, traceable to year and month of manufacture.
x Enclosure IP ratings: As specified in the PRODUCTS section, above.
x The CSA Mark, with or without the "C" and "US" indicators, as shown on the Certificate of Conformity.
x The designation "CSA 15CA70009819X"
x Method of Protection markings (Ex -- markings): As specified in the PRODUCTS section, above. The word
"Class" may be abbreviated "CL", the word "Zone" may be abbreviated "ZN".
x Models appearing in Class 2258 04/84 in the PRODUCTS section shall be marked: "INSTALL PER
CONTROL DRAWING 45190VP10" or equivalent.
x The following bilingual cautions: (as applicable)
Variant
DQD 507 Rev. 2019-04-30
SENSseries LB 480
BERTHOLD TECHNOLOGIES GmbH & Co. KG
Bilingual cautions
all
ISO 3864 Symbol B.3.1
point):
"SEE SAFETY MANUAL FOR FURTHER INFORMATION",
and
"VOIR LE MANUEL DE SÉCURITÉ POUR PLUS DE LES RENSEIGNEMENTS"
ISO 3864 Symbol B.3.1
point):
"NO NOT OPEN WHILE ENERGIZED – IN AN EXPLOSIVE ATMOSPHERE, DE-
ENERGIZE AND WAIT 2 MINUTES BEFORE OPENING",
and
"NE PAS OUVRIR SOUS TENSION – EN PRESENCE D'UNE ATMOSPHÈRE
EXPLOSIVES METTRE HORS TENSION ET ATTENDRE 2 MINUTES"
x1
ISO 3864 Symbol B.3.1
point):
or ISO 7000 symbol 0434
or ISO 7000 symbol 0434
or ISO 7000 symbol 0434
© 2018 CSA Group. All rights reserved.
Master Contract: 215040
Date Issued: 2021-09-27
(triangle with exclamation
(triangle with exclamation
(triangle with exclamation
Page 10
1 – 83
Werbung
Inhaltsverzeichnis
