Assembly; Remove/Insert Battery; Mounting The Tubular Shaft - Parkside PGKGA 40-Li B2 Originalbetriebsanleitung

GB IE
and other foreign bodies.
• Check the appliance before
each use for obvious defects
such as loose, worn or dama-
ged parts. Check the appliance
for signifi cant damage or de-
fects if it is dropped.
• If the device has been dropped
or struck, you must check the
device before starting it and
ensure it is in a good condition.
• Caution! Local regulations may
restrict use of the machine.
• Always maintain the device and
cutting tool in a good condition.
• Observe the following:
Improper maintenance, the use
of non-compliant spare parts or
the unauthorised removal or mo-
difi cation of safety equipment
can lead to damage to the de-
vice and serious injuries to the
person working with the device.
• Secure the device well during
transport to prevent damage to
the device and injuries.
• Before use, check the device for
loose fastenings and damaged
parts, such as cracks in the cut-
ting attachments.
• Do not use any accessories
that are not recommended by
PARKSIDE. This can result in
electric shock or fi re.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and charg-
er from the Parkside
X 20 V Team series. A
detailed description of
56
the charging process
and further information
can be found in the sep-
arate operating instruc-
tions.

Assembly

Remove the battery from the
device before carrying out
any work on the device.
Only use original parts.
The device can be used with either
the hedge trimmer, pole-mounted
pruner or trimmer attachment,
either with spool or 3-tooth blade.
Dismantling is carried out in reverse
order.

Remove/insert battery

1. To remove the battery (25) from the
device, press the release button on the
battery and pull the battery out.
2. To insert the battery (25), push the
battery along the guide rail into the
device. You will hear it click into place.
Only insert the rechargeable
batteries once the device is
completely assembled. Risk
of injury!
Mounting the tubular
B
shaft
Before mounting, remove the
protective cap(s) from the front tu-
bular shaft (2).