General Notes On Safety; Residual Risks - Parkside PGKGA 40-Li B2 Originalbetriebsanleitung

8 " / 195 mm
Blade bar length
30 cm
Cutting diameter
(spool)
30 cm
25 cm
Cutting diameter
(3-tooth blade)
Battery charge level indica-
tor
Direction of rotation, nut,
chain wheel cover
Chain lubrication
Direction of rotation,
screw
MAX
Chain oil
MIN
Attaching the additio-
nal handle
Direction of travel,
saw chain
Direction of travel, spool

General Notes on Safety

Before working with the
equipment, familiarise your-
self with all operating compo-
nents. Practice handling the
equipment and have the func-
tion, operation and working
methods explained to you by
an experienced user or spe-
cialist. Ensure that you can
shut off the equipment imme-
diately in an emergency. In-
appropriate use of the device
may result in serious injury.
In the case of an accident or
malfunction during operation, the
device must be switched off imme-
diately and the battery removed.
Treat injuries appropriately or con-
sult a doctor. For the correction of
faults, read the "Troubleshooting"
chapter or contact our service cen-
tre.

RESIDUAL RISKS

Even if properly operating and
handling this electric tool, some
residual risks will remain. Due to its
construction and build, this electric
tool may present the following haz-
ards:
a) Cuts
b) Ear damage if working without
ear protection.
c) Damage to your health caused
by swinging your hands and
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.
GB IE
47