Herunterladen Inhalt Inhalt Diese Seite drucken

Assembly; Vacuum Extraction Of Dust / Debris; Connecting A Vacuum Dust Extraction Device; Selecting The Right Tool - Parkside PMFW 310 B1 Bedienungs- Und Sicherheitshinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Assembly

Assembly
Q
Vacuum extraction of
Q
dust / debris
Do not use the tool on materials containing asbestos.
Asbestos is a known carcinogen.
DANGER OF FIRE! There is
the danger of fire when working with electrical
devices that have a dust box or can be connected
to a vacuum cleaner. Under certain conditions the
wood dust in the dust extraction bag (or in the vac-
uum's dust bag) may ignite, e.g. as a result of flying
sparks generated when abrading metals or metal
objects left in wood. This can happen particularly if
the wood dust is mixed with paint residue or other
chemicals and the abraded particles are hot from
prolonged abrasion. Therefore you must empty the
device's dust collection box and the vacuum clean-
er's dust bag before taking a break or stopping
work and always avoid overheating of the abrad-
ed particles and the device.
Wear a dust mask!
A lways use vacuum dust extraction.
E nsure that your working area is well ventilated.
o bserve the regulations applicable in your
country for the materials you are working on.
Connecting a vacuum
Q
dust extraction device
Slide together the extraction duct
connection
. Attach the dust extraction
13 c
to the unit. Secure by hooking the case mount-
ing
into the notch
13 a
Push the hose of an approved dust extraction
equipment (e.g. a workshop vacuum cleaner)
on to the adapter for external exhaust suction.

Selecting the right tool

Q
Note: The attachment system with easy tool ex-
change is suitable for popular accessories.
40 GB
and ring
13 b
13
(see Fig. H).
14
Plunge saw blade (20 mm) Z20 B3
Materials:
Sheet and tube up to approx. 3 mm made of
aluminium, copper
Use:
·
Cutting and trimming to length of tube and sheet
(see Fig. J)
Plunge saw blade (32 mm) Z32 B3
Materials:
Wood, plastic, plasterboard and other soft materials
Use:
·
Cutting and plunge sawing
·
Close to the edge sawing, even in difficult to
access areas
Example: Sawing of recesses in lightweight walls.
(see Figs. B and D)
Backing plate
7
Materials:
Wood, metal (sanding sheets included), paint*,
stone*
*depending on the sanding sheet
Use:
·
Sanding at edges and in difficult to access areas
(see Figs. G and H)
5
6

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis