Care And Cleaning; General Information; Cleaning Function - AEG ITE42600KB Benutzerinformation

7. CARE AND CLEANING

WARNING!
Refer to Safety chapters.

7.1 General information

Clean the appliance after each use.
Always use cookware with a clean base.
WARNING!
Sharp objects and abrasive
cleaning agents will damage the
appliance.
Wooden utensils, e.g. spatulas, are perfectly
safe to work with. Small scratches or stains
on the surface have no effect on how the
appliance operates.

7.2 Cleaning function

WARNING!
Always use protective gloves
while cleaning the appliance, to
protect your hands against the
heat.
1. Touch . Each roasting zone is set to
80°C. The display blinks until the
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
You cannot activate or operate the
appliance.
70 ENGLISH
2. When the temperature reaches 80°C, an
3. Put ice cubes one by one on the roasting
4. Dry the appliance with a clean cloth.
7.3 Cleaning when the appliance is
cold
1. Apply a cleaning agent to the roasting
2. Remove the roasting residue with a
3. Clean the appliance with a moist cloth.
4. Dry the appliance with a clean cloth.
5. When the appliance is dry, rub the
Possible cause
The appliance is not connected to
an electrical supply or it is connec‐
ted incorrectly.
The fuse is blown.
temperature reaches 80°C. The function
locks the control panel, but not
acoustic signal sounds, and the control
panel becomes unlocked.
zones (you can also use cold water). Use
a spatula to remove food remains.
Remember to clean the groove around
the appliance too. Remove limestone or
white protein residue using citric acid.
surface and let it set for 5 minutes.
spatula.
roasting surface with some cooking oil.
Remedy
Check if the appliance is correctly
connected to the electrical supply.
Refer to the connection diagram.
Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
.