Herunterladen Inhalt Inhalt Diese Seite drucken

Before First Use; Charging The Appliance; Assembly/Disassembly; Fitting The Handle Rod - Silvercrest SHSS 18 B1 Bedienungsanleitung

2-in-1 akku-hand- und bodenstaubsauger
Vorschau ausblenden Andere Handbücher für SHSS 18 B1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 60
Before first use
Remove all packaging materials and protective
stickers from the appliance, especially the pro-
tective sticker on the contacts on the back of
3
the hand element
o
Place the cradle
o
cradle
clicks into place.
NOTE
The appliance batteries are not charged
upon delivery. The batteries must be charged
for 5–6 hours before using the appliance
for the first time.

Charging the appliance

NOTE
Ensure that the appliance is switched off
before starting to charge the batteries.
To charge the appliance, connect the mains
u
adapter
to a mains socket. Plug the barrel
i
plug
into the charging socket
underside of the cradle
through the recess on the rear of the cradle
o
so that the cradle
Place the handle rod with the attached hand
3
element
onto the cradle
2
indicator lamp
lights up red. When the
appliance is fully charged, the charge indicator
2
lamp
lights up blue.
Do not recharge the batteries until the suction
power of the appliance has become noticeably
weaker.
NOTE
When the batteries are weak, the charge
2
indicator lamp
this happens, the appliance can be operated
for another 3 to 5 minutes.
Once the batteries are completely discharged,
the charge indicator lamp
times and the appliance switches off.
SHSS 18 B1
.
onto the stand until the
p
on the
o
. Feed the cable
is not resting on the cable.
o
. The charge
starts flashing blue. When
2
flashes red five

Assembly/disassembly

Fitting the handle rod

1) Loosen the screw
0
rod
with a screwdriver in anticlockwise
direction. Pull the screw
hole on the handle rod
2) Attach the handle rod
bracket of the appliance. Push the handle rod
0
all the way onto the handle rod bracket
until it is firmly seated on the appliance.
(Fig. 1).
o
Fig. 1
3) Insert the screw
the back of the handle rod
q
screw
q
at the back of the handle
q
out of the screw
0
.
0
to the handle rod
q
into the screw hole at
0
. Tighten the
clockwise with a screwdriver (Fig. 1).
GB│MT
 49

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis