Before First Use - Silvercrest SAST 18 A1 Bedienungsanleitung

Before first use
1) Remove all packaging materials from the appliance.
2) Check whether the filter holder
in the dirt container
To insert the filter holder
proceed as follows:
–
The filter holder
position. The side labelled "UP" must be facing upwards. Push the filter
holder
the filter holder
container
–
Insert the HEPA filter
the HEPA filter
holder
arrow on the filter holder
the
3) Place the dirt container
–
First, place the contacts on the underside of the dirt container
the contact pins on the underside of the motor unit
two catches on the motor unit
container
–
Press the upper side of the dirt container
the motor unit
container
SAST 18 A1
u
i
. They may have worked loose during transport.
u
and the HEPA filter
u
can only be fitted in the dirt container
u
as far as possible into the dirt container
u
is straight and that the rubber lip seals the dirt
i
.
z
into the filter holder
z
fit into the corresponding recesses on the filter
u
. The arrow on the HEPA filter
u
. Turn the HEPA filter
symbol.
i
on the motor unit
i
.
r
so that the catch audibly engages. The dirt
i
is now firmly seated on the motor unit
z
and the HEPA filter
z
into the dirt container
i
u
so that the catches on
z
must be aligned with the
z
r
:
r
r
into the recesses on the dirt
i
against the upper side of
are firmly installed
i
,
i
in one
. Make sure that
clockwise towards
i
onto
. This pushes the
r
.
GB │ IE │
9 ■