Before First Use; Information About The Batteries - Silvercrest SAST 18 A1 Bedienungsanleitung

Before first use
1) Remove all packaging materials from the appliance.
2) Check whether the filter holder
in the dirt container
To insert the filter holder
proceed as follows:
–
The filter holder
position. The side labelled "UP" must be facing upwards. Push the
filter holder
that the filter holder
container
–
Insert the HEPA filter
on the HEPA filter
holder . The arrow on the HEPA filter
arrow on the filter holder
the
3) Place the dirt container
–
First, place the contacts on the underside of the dirt container
contact pins on the underside of the motor unit
catches on the motor unit
–
Press the upper side of the dirt container
motor unit
now firmly seated on the motor unit

Information about the batteries

■ The appliance runs on rechargeable lithium-ion batteries. Before using the
appliance for the first time, the batteries must be charged. The charge indi-
cator lamp
charged, the charge indicator lamp
■ If the charge indicator lamp
batteries are fully discharged and the appliance will switch off after around
1 minute.
■ 8 │ GB │ IE │ NI │ CY
. They may have worked loose during transport.
and the HEPA filter
can only be fitted in the dirt container
as far as possible into the dirt container
is straight and that the rubber lip seals the dirt
.
into the filter holder
fit into the corresponding recesses on the filter
. Turn the HEPA filter
symbol.
on the motor unit
into the recesses on the dirt container
so that the catch audibly engages. The dirt container
flashes red during charging. As soon as the batteries are fully
flashes alternately green and red, the
and the HEPA filter
into the dirt container
so that the catches
must be aligned with the
:
. This pushes the two
against the upper side of the
.
lights up green.
are firmly installed
,
in one
. Make sure
clockwise towards
onto the
.
is
SAST 18 A1