Changing The Fuses Of The Ma-Input - Wetekom 31 32 54 Bedienungsanleitung

All manuals and user guides at all-guides.com
6.2 Changing the Fuse of the mA-Input (7)
Procedure:
Turn off the unit and disconnect all measuring
cables from the sockets and terminals of the
unit.
Loosen the screws on the back of the unit (see
"Replacing the Battery"). Lift off the rear cover.
Now remove the battery. Disconnect the
battery from the battery clip.
Now loosen the screws marked in the picture
with the white rings.
After that, flip forward the circuit board and find
the fuse marked in the lower picture with a
white ring.
Carefully remove it and replace it with a fuse
of the same type and dimensions (F250
mA/250V Ø5x20 mm).
After the fuse has been replaced, assemble
the unit in reverse order.
Never Operate the Unit with the Housing Open.
6. Cleaning and Maintenance
41