Operating Elements And Connections; Function Buttons - Wetekom 31 32 54 Bedienungsanleitung

All manuals and user guides at all-guides.com

3. Operating Elements and Connections

3.1 Function Buttons

ON/OFF Button (3) "POWER"
Press this button to turn the unit on or off.
The unit is equipped with an auto-off function, which turns off 15
minutes after the last operation with the unit. To turn the unit on again,
turn it OFF and ON.
"Hold" Button (2)
With the "HOLD" button you can "freeze" the last measured value on
the display. After you have turned off this function, the current value is
displayed.
3.2 The Terminals and Sockets on the Unit
10-A-Input (6)
This socket is intended for connecting the red measuring cable for
taking AC/DC current measurements in the range up to 10 Ampere. Set
the rotary switch (4) to "10 A" (AC/DC)
mA-Input (7)
This socket is intended for connecting the red measuring cable for
taking AC/DC current measurements of up to 200 mA. Set the rotary
switch (4) to the 20 or 200 mA position (AC / DC).
COM-Input (8)
This socket is intended for connecting the black measuring cable for all
measurements (mass connection).
V/Ω/F/°C/ -Input (9)
This socket is intended for connecting the red measuring cable for
voltage and resistance measurements, capacitance measurements,
frequency measurements, and temperature measurements as well as
for the diode function and continuity tests. The rotary switch (4) must be
turned to the corresponding position for each function.
28