Before Use; Charging The Appliance Battery; Start Charging; Stop Charging - Parkside PAT 4 A1 Originalbetriebsanleitung

Before use

Charging the appliance battery

NOTE
► The battery is supplied partially charged.
Before first use, charge the battery in the charger for at least
3 hours. This guarantees full battery power. You can charge
the lithium-ion battery at any time without shortening its ser-
vice life. Interrupting the charging process does not damage
the battery.
► If the battery charge level indicator
use, the battery has 30% of its capacity and needs to be
charged.

Start charging

♦ Connect the charger
device.
♦ Connect the charger
source.
■ The battery charge level indicator
ing. The indicator emits a red light during the charging process.
Once the display lights up green, the battery is fully charged.

Stop charging

♦ Disconnect the charger
♦ Disconnect the charger
device.
NOTE
► The power tool does not work whilst charging.
It is not unusual for the handle to heat up a little during charging.
PAT 4 A1
lights up red during
to the charging socket
to a 100 - 240 V ~ 50/60 Hz power
shows the progress of charg-
from the mains power supply.
from the charging socket
on the
on the
GB │ IE │ NI │
11 ■