Safety Guidelines For Battery Chargers; Original Accessories/Auxiliary Equipment; Before Use; Charging The Battery Pack (See Fig . A) - Parkside PAT 20-Li A1 Originalbetriebsanleitung

■ Never use this tacker for fastening electri-
cal cables. It is not suitable for the installation
of electrical lines, can damage the insulation
of electrical cables and thus cause electrical
shocks and increase the risk of fire .

Safety guidelines for battery chargers

This appliance may be used by chil­
■
dren aged 8 years and above and
by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super­
vision or have been told how to use
the appliance safely and are aware
of the potential risks . Do not allow
children to use the appliance as a
toy . Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised .
The charger is suitable for
indoor use only .
WARNING!
If the connecting cable needs to
■
be replaced, this must be carried
out by the manufacturer or an
authorised representative in order
to avoid safety hazards .
CAUTION!
♦ This charger can only charge the following
batteries: PAP 20 A1 / PAP 20 A2 / PAP 20 A3 .
♦ A current list of battery compatibility can be
found at www .lidl .de/Akku .
■ 30 │ GB │ MT
Original accessories/auxiliary
equipment
Only use the accessories and additional
■
equipment that are specified in the oper-
ating instructions and compatible with the
appliance.
WARNING!
► Do not use any accessories not recommended
by PARKSIDE . This can lead to electric shock
and fire .

Before use

Charging the battery pack (see fig . A)

CAUTION!
► Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger .
NOTE
► Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C .
If a lithium­ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level
is between 50% and 80% . The storage
climate should be cool and dry and the
ambient temperature should be between 0°C
and 50°C .
♦ Connect the battery pack
battery charger
♦ Insert the power plug into the socket .
The control LED
♦ The green LED indicates that the charging
process is complete and the battery pack
is ready .
to the high­speed
(see fig . A) .
lights up red .
PAT 20-Li A1