Inhaltsverzeichnis
Werbung
GB
13 Low-kickback chain
helps significantly reduce kickback, or the intensity of kickback, due to specially designed depth gauges and Guard links.
19 hain catcher
Reduces the danger of injury in the event saw chain breaks or derails during operation. The catcher is designed to intercept a whipping
chain.
2. SAFETY RULES
Meaning of symbols marked on the product
The following pictograms are used in these instructions for use:
Read the user manual before using the machine
In accordance with essential applicable safety standards of European directives
Class II machine – Double insulation – You don't need any earthed plug.
Whenever the machine is in use, safety goggles must be worn to safeguard against flaying object, as must ear protectors, such
as a soundproof helmet, in order to protect the operator's hearing. If the operator is working in an area where there is a risk of
falling objects, a safety helmet must also be worn.
Wear gloves to protect your hands
Warning! Danger
Do not expose to rain
Remove plug from the mains immediately if cable is damaged or cut
Wear safety boots to protect against electric shock
Sound power level 105 dB (A)
Faulty and/or discarded electrical or electronic apparatus have to be collected at the appropriate recycling locations.
Warning! When using electric tools, basic safety precautions, including the following, should always be followed to reduce the
risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these
instructions.
Warning! Take care not to expose this tool to rain and remove plug from mains immediately if the supply cable is damaged.
1.
Keep work area clean
Cluttered areas invite injuries. Do not start cutting until you have a clear work area, secure footing, and a planned retreat path from the
falling tree.
2.
Consider work area environment
Use extreme caution when cutting small sized brush and sapling, as slender material may catch the saw chain and be whipped toward you
or pull you off balance. Do not operate a chain saw in a tree unless you are specifically trained to do so. When cutting a limb that is under
tension, be alert for spring back so that you will not be struck when the tension in the wood fibers is released. Do not expose the chain saw to
rain. Do not use the chain saw in damp or wet locations. Do not use the chain saw in the presence of flammable liquids or gases.
3.
Store idle chain saw
When not in use, tools should be stored in a dry, high or locked up place, out of reach of children.
4.
Do not force the chain saw
The chain saw will do a better and safer job when used at the rate for which it was intended.
5.
Use the right tool
Cut wood only. Do not use the chain saw for purposes for which it was not intended. For example, do not use the chain saw for cutting
plastic, masonry, or non-building materials.
6.
Dress properly
Do not wear loose clothing or jewelry, as they can get caught in moving parts. Non-skid footwear is recommended when working
outdoors. Wear protective hair covering to contain long hair.
04
Ferm
Ferm
121
Werbung
Inhaltsverzeichnis
