Description - struers Abramin Benutzerhandbuch

Abramin
Instruction Manual

1. Description

Abramin is a microprocessor controlled machine for the grinding and
polishing of specimens fixed in a specimen holder disc. Grinding and
polishing are carried out on a horizontal rotating disc and the rotating
specimen holder with the specimen is pressed eccentrically against
it.
Amount of pressure, lubricant or cooling water can be manually
adjusted whereas the microprocessor controls time, disc speed and
choice between water and lubricant.
Abramin has 8 program steps into which the above-mentioned data
can be individually programmed. The disc and cooling water or
lubricant can also be started manually.
With normal use there is, therefore, only the need to select the
respective program step, adjust the pressure and start the process
with the two push-buttons marked "Start".
3