Electrical Connection - Wolkenstein W S4-60 A++BTZ Bedienungsanleitung

4
L
OWER CHIMNEY
5
U
PPER CHIMNEY
11
U
PPER CHIMNEY BRACKET
12
S
CREWS
13. Fix the lower chimney on the body of the extractor hood using two ST4*8 mm
screws (s. fig. below).
14. Insert the aluminium grease filter(s) and connect the appliance to the mains
Check the correct position of the hood from front and side perspective.
Otherwise the appliance will not work properly.

2.3 Electrical connection

Check that the voltage indicated on the rating plate matches the mains voltage of
your home before connecting the extractor hood to the mains.
Check that the extractor hood is installed properly before you connect the
appliance to the mains.
11
If the socket is covered by the chimney, you must plug in the appliance at an earlier point in
time.
(4*8 mm)
.
11
52