Grease Filter(S); Control Panel - Wolkenstein W S4-60 A++BTZ Bedienungsanleitung

4. Repeat the procedure on the other side of the motor.
5. Reinstall the
ALUMINIUM GREASE FILTER
6. If you want to uninstall the
remove them.
WARNING! Install the carbon filters safely and properly; otherwise the
carbon filters can loosen and cause hazardous situations.
NOTICE! The suction capacity is decreased by installed carbon filters.
NOTICE! Depending on frequency of use, replace the carbon filters every
three to six months. Clean the grease filter(s) regularly for proper operation
of the motor (s. chapter C

3.3 Grease filter(s)

Always ensure that the grease filter(s) is / are inserted properly.
Clean the grease filter(s) regularly (s. chapter C
WARNING! Operate the appliance with inserted grease filters only.
Otherwise recirculating-transported fat will deposit in the appliance and
the exhaust system. RISK OF FIRE!

4. Control panel

NOTICE! Never press two buttons of the control panel simultaneously.
After you have connected the appliance to the mains, the display flashes slowly
The extractor hood closes. The appliance is now in
Depending on model
13
(
S
CARBON FILTERS
LEANING AND MAINTENANCE
(Fig. similar: Modifications are possible)
).
, turn the filters anti-clockwise and
).
LEANING AND MAINTENANCE
-
STAND BY MODE
).
13 .
.
55