Wolkenstein W S4-60 A++BTZ Bedienungsanleitung Seite 51

9. Place the chimney on the extractor hood and fix the lower chimney bracket (6)
on the wall (10) using the 2 appropriate screws (4 mm*30 mm).
4
L
OWER CHIMNEY
6
L
OWER CHIMNEY BRACKET
8
D
OWELS
9
S
CREWS
10
W
ALL
10. Pull out the upper chimney. Adjust the upper chimney relevant to the height you
desire (s. fig. below).
11. When you have reached your desired height, mark the drill holes for the upper
chimney bracket (11). Drill the holes to install the upper chimney bracket. Then
fix the upper chimney bracket on the wall properly using the appropriate fixing
material.
12. Fix the upper chimney (5) on the chimney bracket (11) properly using 2 screws
(12 / 4*8 mm); s. fig. below.
51