Reminder Display Of The Carbon Filter(S) - Wolkenstein W S4-60 A++BTZ Bedienungsanleitung

H
OW TO ACTIVATE THE MANUAL CLEANING MODE
1. The extractor hood must be in
2. Press and hold the button -On / Off-
MANUAL CLEANING MODE
3. The extractor hood opens.
4. When the extractor hood is open completely, the
displayed.
5. Now you can remove / insert the aluminium grease filter(s) and / or insert or
replace the carbon filters (in recirculation mode only!).
H
OW TO DEACTIVATE THE MANUAL CLEANING MODE
1. When the appliance is in
-On / Off- (1) for 3 seconds to deactivate the
2. The extractor hood closes.
3. When the extractor hood is closed completely, the appliance is in
again.
MODE

4.1.2 Reminder display of the carbon filter(s)

 You can use the button -I
OF THE CARBON FILTER
H
OW TO RESET THE REMINDER DISPLAY OF THE CARBON FILTER
 Press the button -I
DISPLAY OF THE CARBON FILTER
replaced the carbon filter(s) [in recirculation mode only!] or if you use the
appliance in extraction mode.
When you use the appliance for the first time, the
( )
CARBON FILTER S
After 14 hours of operation the
also goes on automatically.
-
STAND
.
MANUAL CLEANING MODE
-
LLUMINANT
( );
S
- (3) for some time to reset the
LLUMINANT
( ); e.g. if you do not need to replace or you have
S
goes on automatically.
REMINDER DISPLAY OF THE CARBON FILTER
(extractor hood is closed).
BY MODE
(1) for 3 seconds to activate the
MANUAL CLEANING MODE
, press and hold the button
MANUAL CLEANING MODE
(3) to reset the
REMINDER DISPLAY
REMINDER DISPLAY OF THE
:
is
:
.
-
STAND BY
( ) :
S
REMINDER
( )
S
60