Replacing Of The Illuminant; Trouble Shooting - Wolkenstein W S4-60 A++BTZ Bedienungsanleitung

6.3 Replacing of the illuminant

WARNING! The LED-illuminant must be replaced by a competent
person only. If the LED-illuminant is damaged, please contact a qualified
professional. Illuminants and the replacing of illuminants are not included
in guarantee.

7. Trouble shooting

POSSIBLE CAUSE
T
1. The plug of the appliance is not
connected to the socket.
2. The plug has become loose.
3. The socket is not supplied with
energy.
4. The fuse is switched off.
5. The voltage is too low.
L
1. Ventilation damper blocked.
2. Motor mounting defective.
1. Motor defective.
1. One-way valve is leaky.
MALFUNCTION
HE APPLIANCE DOES NOT WORK AT ALL
IGHT IS ON BUT MOTOR DOES NOT WORK
A
BNORMAL MOTOR
S
MEAR OF OIL
MEASURE
:
1. Connect the appliance to the mains
properly.
2. Check the plug.
3. Check the corresponding socket by
connecting it with another appliance.
4. Check the fuse box.
5. Compare the data on the model plate
with the data of your energy supplier.
1. Remove blockage.
2. Replace motor.
- :
SMELLS
1. Replace motor.
:
1. Seal the valve.
:
65