Grease Filters - Wolkenstein W S4-60 A++BTZ Bedienungsanleitung

S
PECIAL INSTRUCTIONS FOR APPLIANCES WITH A STAINLESS STEEL CASING
 To clean stainless steel surfaces, use a non-abrasive stainless steel cleaning agent
only.
NOTICE! Never use stainless steel cleaner for the direct environment of
the control panel or the control panel itself.
NOTICE! Aggressive detergents such as abrasive detergents, vinegar
cleaners, etc. damage the surface of the extractor hood.

6.1 Grease filters

WARNING! Failure to follow the cleaning instructions will increase the
RISK OF FIRE due to fat deposits.
NOTICE! The colour of the metal surface may change due to frequent
cleaning as well as the use of aggressive detergents. Such changes do
not influence the capacity of the appliance and are no reason for
complaint.
NOTICE! Do not damage the grid of metal-made (aluminium) grease
filters.
 Clean the filters by hand or in a dishwasher regularly (up to 55
 Do not use any acrid or corrosive detergents.
 Do not use any abrasive detergents!
 Do not use any alkaline dishwasher-detergents! (pH more than 7).
C
LEANING INTERVAL FOR ALUMINIUM GREASE FILTERS
 Every 2 - 3 weeks according to the frequency of use of the extractor hood.
M
ANUAL CLEANING OF THE ALUMINIUM GREASE FILTERS
1. Soak the aluminium grease filter(s) in warm rinse water (up to 55
2. Then clean the grease filter(s) with a soft brush. Be careful not to damage the grid
of the grease filter(s).
3. After cleaning: Rinse the grease filter(s) thoroughly using hot water.
4. Repeat this process in case of stubborn soilings or deposits.
15 Depending on model
:
15
0 C).
:
:
0 C).
63