Replacement; Maintenance; Technical Data; List Of Accessories - GOK Caramatic DriveOne Montage- Und Bedienungsanleitung

REPLACEMENT

If there is any sign of wear or if the product or parts thereof are damaged, it must be replaced.
When the product has been replaced, observe the steps ASSEMBLY, LEAK TESTING and
START-UP.
To ensure that the installation works faultlessly under normal operating conditions, it is
recommended that you replace the device within 10 years of the date of manufacture.

MAINTENANCE

Upon proper ASSEMBLY and OPERATION, the product is maintenance-free.

TECHNICAL DATA

Maximum admissible pressure
Inlet pressure p
Nominal regulated pressure
Nominal flow rate M
Maximum permitted pressure drop in
the downstream installation
S2SR (OPC)
Housing material
Ambient temperature
For additional technical data or special settings, see type label of the product!

LIST OF ACCESSORIES

Caramatic TwoControl
Cover frame, colour: anthracite
Eis-Ex regulator heating, 2m connection cable
Information and control unit (control panel), 6m connection cable

DISPOSAL

To protect the environment, our products may not be disposed of along with
household waste.
The product must be disposed of via a local collection station or a recycling station.

WARRANTY

We guarantee that the product will function as intended and will not leak during
the legally specified period. The scope of our warranty is based on Section 8 of
our terms and conditions of delivery and payment.

CERTIFICATE

Our management system is certified according to ISO 9001, ISO 14001 and
ISO 50001, see:
www.gok.de/qualitaets-umwelt-und-energiemanagementsystem.
18 / 36
g
PS 16bar
0.3 to 16bar
p alternatively 30 or 50mbar
d
1,5 kg/h
ΔP5
100 or 150mbar
die-cast zinc ZP0410
-30°C to +60°C
Caramatic DriveOne
Order no.
71 391 00
71 390 20
71 391 20
Artikel-Nr. 71 813 50