Safety During System Maintenance; Pump Identification; Technical Characteristics - Interpump Group SS70 Betriebs- Und Wartungsanleitung

4. The work area jet range must be absolutely prohibited to
and free from objects that, inadvertently under a pressure
jet, can be damaged and/or create dangerous situations.
5. The water jet must always and only be pointed in the
direction of the work area, including during preliminary
tests or checks.
6. The operator must always pay attention to the trajectory
of debris removed by the water jet. Where necessary,
suitable guards must be provided by the Operator to
protect anything that could become accidentally exposed.
7. The operator should not be distracted for any reason
during work. Workers needing to access the operating area
must wait for the Operator to stop work on his/her own
initiative, after which they should immediately make their
presence known.
8. It is important for safety that all team members are always
fully aware of each other's intentions in order to avoid
dangerous misunderstandings.
9. The high pressure system must not be started up and run
under pressure without all team members in position and
without the Operator having already directed his/her lance
toward the work area.
3.5

Safety during system maintenance

1. High pressure system maintenance must be carried out
in the time intervals set by the manufacturer who is
responsible for the whole group according to law.
2. Maintenance should always be performed by trained and
authorized personnel.
3. Assembly and disassembly of the pump and the various
components must only be carried out by authorized
personnel, using appropriate equipment in order
to prevent damage to components, in particular to
connections.
4. Always only use original spare parts to ensure total
reliability and safety.
5

TECHNICAL CHARACTERISTICS

Model Rpm
SS 7030 1450
SS 7037 1450
SS 7045 1450
SS 7061H 1450
SS 7070H 1450
SS7091H 1450
Model Rpm
SN 7030 1450
SN 7037 1450
SN 7045 1450
SN 7061 1450
SN 7070 /
1450
SN 7070-F
SN7091 1450
Model Rpm
SW 7091H 1450
4
Each pump has an identification label see pos.  of Fig. 1
showing:
- Pump model and version
- Serial number
- Max revs
- Absorbed power HP - kW
- Flow rate l/min - Rpm
Flow rate
l/min Gpm
30 7.9
37 9.7
45 11.9
61 16.1
70 18.5
100 26.4
Flow rate
l/min Gpm
30 7.9
37 9.8
45 11.9
61 16.1
70 18.5
100 26.4
Flow rate
l/min Gpm
100 26.4
22

PUMP IDENTIFICATION

Model, version and serial number must always be
indicated when ordering spare parts.
Pressure
bar psi
200 2900 11.7
200 2900 13.9
200 2900
150 2175
130 1885
100 1450
Pressure
bar psi
300 4350 18.4
250 3620 18.4
210 3050 18.4
150 2170 18.4
130 1885 18.4
100 1450 18.4
Pressure
bar psi
100 1450 19.1
Fig. 1
Power
kW HP
16
19
17.6 24
17.6 24
17.6 24
19.1 26
Power
kW HP
25
25
25
25
25
25
Power
kW HP
26